This video will show you how to get your Wireless Outdoor Camera up and running.
Here's what you'll need:
The latest generation of the SimpliSafe® Base Station with the updated firmware,
the SimpliSafe® Mobile App,
a Phillips-head screwdriver,
a 3/16th inch drill bit if mounting on brick, tile or stucco surfaces,
a compatible USB adapter,
and a 2.4 gigahertz network connection.
First, fully charge your camera battery before installation.
Charging can take up to six hours.
Once your battery is fully charged,
start setting up in the SimpliSafe® App.
Then insert the battery into your camera and twist the cap on.
You'll hear a confirmation tone
(tone)
and see a flashing white light if this is done correctly.
Your Wireless Outdoor Camera should be placed six to eight feet above ground
and point 30 degrees down when in a normal orientation.
To install the magnetic dome, twist off the cap at the bottom of the dome.
On a brick, stone or stucco surface, you'll need wall anchors.
To install wall anchors, drill two holes into the wall with a 3/16th inch drill bit.
Gently tap the anchors into the holes with a hammer or mallet.
On a wooden or vinyl surface,
you can skip straight to installing the magnetic dome.
Screw the cap into the wall with a handheld screwdriver.
Then twist the dome back onto the cap.
Stop when you hear it click into place.
Then attach your camera to the mounting dome.
The mounting dome is magnetic,
so the camera will snap on when you place it on top.
You can twist the camera left and right to adjust the angle.
Finish setting up in the app
and your Wireless Outdoor Camera will be ready to protect your home.